Silica gel ink printer cleaning method 

If you want to print ink gel successfully, machinery is the most important thing, we imagine that if the printing machine is suck it, here is a point of failure. "The work, or is the ink everywhere, we printed products can be successful? Here, the first step we take in printing machines is to clean it, and how to clean it? Come and see: 

Our successful production requires dealing with some simple problems. Decontamination is a problem that is easy to handle. However, many operators do very poorly, which results in waste and affects the quality of printing. When there is dirt or silica gel ink printing machine, to make decontamination treatment, stop printing machine after the screen frame up, then, is wrong with solvent violently wipe stencil emery cloth side, the sound of the printing shop can hear, often damaged template. 

So, how do you really do it? A truly knowledgeable operator seldom go to the graphic printing surface friction force template, because he knew that the print definition requires all text right edge keep clear graphic interface emulsion layer. Hard rubbing will damage the emulsion layer, graphic interface, and even wipe out the emulsion layer, leaving only the bare mesh. 

When printing a high number of color images, the silk thread can not withstand the force of friction. Therefore, the key to decontamination is to first prevent the stencil from being contaminated. The main reason is that improper ink control, resulting in dry ink left in the mesh. When using solvent inks or water-based inks, the reason is that the ink is too thin or too thick. Should not change in the state of inking. In the use of UV curing inks, should try to avoid exposure to ultraviolet light, but also to avoid sunlight. 

Another silica gel ink control problems and printing speed regulation will lead to uneven supply, so that insufficient ink mesh dry and solid. The last reason for the drying of silicone ink is that the squeegee has been improperly set or worn. To avoid any of these problems, the squeegee should be periodically turned over, or often replaced with a new squeegee.